Small footprint.
Spotless floors.
The CleanPro C30 sweeps and vacuums, with a dust-mopping mode for dry floor care in offices, hallways, and storefronts. Sold, demoed, or tested right here in Minnesota.
View lease pricing
| 24 mo | $992/mo |
| 36 mo | $684/mo |
| 48 mo | $540/mo |
| 60 mo | $454/mo |
Right Robot
We match the model to your facility — never the other way around.
Right Route
We map and optimize your space so it runs right from day one.
Trained Staff
Your team learns the robot before we hand over the keys.
Local Support
Shakopee-based service. We answer the phone.
3-in-1 dry cleaning, built for tight footprints
The CleanPro C30 combines sweeping and vacuuming, and offers a dust-mopping mode — all dry. No water, no wastewater to manage. It's built for daily floor care in compact spaces where a bigger scrub robot wouldn't fit or wouldn't be needed.
The C30 handles the repetitive dry-floor route so your team can focus on wet cleaning, restrooms, and detail work. It adapts around people, carts and normal traffic — built to run during real operating hours, not just after close.
Sweeps
Debris and dust picked up on every pass.
Vacuums
Carpet and hard floors, corner to corner.
Dust Mops
A finished floor — not just a swept one.
Attended or unattended — your call.
After mapping and route checks, run scheduled cleaning with staff responsible for setup, servicing, and responding to alerts. LiDAR and vision sensors help detect obstacles; safe operation depends on the environment and approved settings.
- LiDAR + vision navigation
- Obstacle avoidance around people, carts, and clutter
- Repeatable routes — learned once, run nightly
- Frees your staff for higher-value work
Built for your floor
Best fit
- Offices
- Libraries
- Boutiques & retail
- Clinics
- Schools
- Hallways & corridors
Best in compact, mostly-dry environments — hard floors and short-pile carpet. Coverage up to roughly 26,900 sq ft on a full charge.
Not the right fit when...
- The floor needs wet mopping, scrubbing, or spill cleanup — the C30 is dry-only
- Stairs, large thresholds, or uneven terrain are central to the route
- Cords, loose rugs, or furniture constantly block the path
- The space is large open hard-floor acreage — better suited to the C40 or C55
- The expectation is zero staff involvement
Not sure? RevoRoute can test the route in your facility before you make a decision.
C30 specifications
| Specification | US value | What it means for your building |
|---|---|---|
| Dimensions (W × D × H), without dust mop | 19.29 × 20.47 × 29.53 in | Base footprint; check the full route and turning space. |
| Dimensions (W × D × H), with dust mop | 19.29 × 24.02 × 29.53 in | Allow for the attached mop behind the robot. |
| Weight (with battery) | 77.2 lb | Plan safe transport between floors or buildings. |
| Weight (without battery) | 66.1 lb | Battery removal reduces transport weight. |
| Cleaning functions | Sweeping, vacuuming, dust-mopping | Dry floor care; no wet scrubbing or spill pickup. |
| Maximum cleaning width | 24.02 in | Includes the two side brushes and main brush. |
| Published cleaning efficiency | Up to 6,458 sq ft/hour | Manufacturer figure; turns, traffic and floor type affect results. |
| Maximum area per charge | Up to 26,910 sq ft | An upper-limit claim; we measure your usable route at the demo. |
| Runtime (sweeping / vacuuming) | 3–6 hours | Varies with cleaning mode, settings and floor conditions. |
| Runtime (dust-mopping) | Up to 10 hours | Dust-mop mode has a different power demand. |
| Charge time | 5–6 hours | Build charging time into the cleaning schedule. |
| Battery | DC 25.6V, 28.5Ah | Use the manufacturer-approved charging equipment. |
| Dust bag capacity | 3.7 US qt | Service frequency depends on the amount of debris. |
| Maximum suction | About 2.76 psi | Maximum setting; select the right suction for the floor. |
| Maximum moving speed | 2.62 ft/s | Actual route speed depends on traffic and settings. |
| Obstacle climbing | Up to 0.79 in | Manufacturer limit; check each threshold on the actual route. |
| Carpet pile height | 0.39 in or less | For regular low-pile carpet; confirm the surface at the demo. |
| Maximum slope | 8° or less | A stated equipment limit; confirm route suitability before deployment. |
| Touchscreen | 7 in | Onboard controls for selecting and managing cleaning tasks. |
| Obstacle sensing | LiDAR, stereo vision, anti-collision sensor | Keep the route clear and follow deployment guidance. |
| Working noise | 70 dB or less | Evaluate sound on your floor during the demo. |
| Operating environment | Indoor, flat ground | We test the floor surface and transitions before deployment. |
| Operating temperature / humidity | 32–104°F; 20–80% RH | Use within the stated indoor operating conditions. |
| Storage temperature / humidity | 5–113°F; 20–80% RH | Store within the manufacturer’s stated conditions. |
Source: KEENON C30 datasheet V1.2 (April 10, 2025). US conversions are rounded. Coverage, runtime and throughput depend on your layout, floor surface, traffic and settings. We measure the real results during your demo.
Runtime and real-world coverage
Sweep & vacuum
3–6 hrs
Dust-mop mode
Up to 10 hrs
Charge time
5–6 hrs
Cleaning efficiency: about 6,458 sq ft/hour · Full-charge coverage: up to 26,910 sq ft
What happens during your on-site demo
We bring the C30 to your facility, map a real route, and measure cleanable square footage, minimum clearances, elapsed runtime, and completion. The C30 is dry-only, so there are no water tanks to service. We still plan dust-bag changes, brush and sensor care, charging, and the cleaning schedule.
The purpose of the demonstration is to determine whether the C30 fits your facility — not to force the wrong robot into the wrong application.
Trained and supported right here in Minnesota
Right Robot + Right Route + Staff Training + Local Support
1
Demo & Assessment
2
Delivery & Setup
3
Mapping & No-Go Zones
4
Staff Training
5
Remote Troubleshooting
6
Route & Settings Changes
7
Shakopee Parts & Service
Straight answers about the CleanPro C30
How much does the CleanPro C30 cost?
Can we try it on our own floors before buying?
What floors and spaces is the C30 built for?
Who installs, trains and services it?
Is the C30 actually running in Minnesota?
Ready to see the CleanPro C30 on your floor?
Book a live demo — we bring the robot to your facility, map a real route, and let it prove itself.
Taylor · Owner · 612-441-1095 • Email Contact R³